83558-87-6

Description

2,2-Bis(3-amino-4-hydroxyphenyl)hexafluoropropane (6FAP) is white crystal. Its boiling point and density are expected to be 411.3±45.0 °C and 1.545±0.06 g/cm3, respectively. It is slightly soluble in DMSO and methanol.The product is non-toxic and can be stored at room temperature away from light and air.

Synthesis

30 g two (3-nitro-4-hydroxyphenyl) hexafluoropropanes are dropped into the 1000 mL autoclave, add 300 g DMF and 1.5 g palladium/carbon (the mass fraction of palladium in the palladium/carbon is 5%), press hydrogen to 1MPa, open stirring and be warmed up to 70 ℃, stop reaction after two (3-nitro-4-hydroxyphenyl) hexafluoropropane content＜0.1%, target product two (3-amino-4-hydroxyphenyl) hexafluoropropane Fluoropropane gas phase content is 98%, and the system is black, and the temperature of the still is lowered to room temperature, filtered, and the filtrate is de-dried under reduced pressure at 70-80°C to obtain bis(3-amino-4-hydroxyphenyl) hexafluoropropane crude product , the crude product is recrystallized, the recrystallization solvent is water and DMF, and the mass ratio of bis(3-amino-4-hydroxyphenyl)hexafluoropropane, water and DMF is 1:4:2. First, the bis(3-nitro-4-hydroxyphenyl) hexafluoropropane crude product is mixed with the recrystallization solvent to increase the still temperature to 60 °C and stir, and then the still temperature is reduced to 10-20 °C for crystallization, filtered, After drying, 25.4 g of pure bis(3-nitro-4-hydroxyphenyl)hexafluoropropane was obtained. The yield of bis(3-amino-4-hydroxyphenyl)hexafluoropropane was 98.3% and the purity was 99.6%. 1H-NMR (400MHz, D6-DMSO) δ (ppm): 4.64 (s, 4H), 6.42 (d, 2H), 7.57 (s, 2H), 6.65 (d, 2H), 9.36 (s, 2H). 19F-NMR (400MHz, D6-DMSO) δ (ppm): -62.78. [1].

Physical properties

White powder

Uses

2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane（BisAPAF） is a polyimide monomer.It is mairly used in the aynthesis of the heat resisting polymers,especially in the manufacture of specialty polymeoric electronic material-fluorinated polyimides.

General Description

2,2-Bis(3-amino-4-hydroxyphenyl)hexafluoropropane, also referred to as 4,4′-(1,1,1,3,3,3-hexafluoro-2,2-propanediyl)bis(2-aminophenol), is an aromatic diamine.